Browse Our Collection
Get instant quotes that fit your budget perfectly.
Al Shakru Sheets and Plates, a well-regarded manufacturer and supplier based in Dubai, UAE, focuses on high-performance Monel K500 Sheets and Plates . These products are engineered to deliver exceptional corrosion resistance, remarkable strength, and durability, even in the most demanding conditions. Manufactured to comply with stringent international standards, these nickel-copper alloy sheets and plates guarantee accurate thickness, a consistent surface finish, and reliable mechanical performance. Through its dedication to cutting-edge manufacturing methods and thorough quality control, Al Shakru Sheets and Plates reliably supplies premium products. The company serves a wide range of industries, such as marine, chemical processing, aerospace, and oil and gas, offering Monel K500 Sheets and Plates ideally suited for applications that require structural integrity, corrosion resistance, and dependability at elevated temperatures.
Monel K500 Sheets and Plates are made up mainly of nickel (roughly 63–70%) and copper (about 28–34%), along with minor additions of aluminum and titanium for age-hardening. They feature a tensile strength ranging from 860–1100 MPa, a yield strength of 345–690 MPa, and outstanding ductility. These sheets and plates perform exceptionally well against corrosion caused by seawater, acids, and alkalis, and they also retain strong mechanical stability and toughness at high temperatures. Thanks to their distinctive combination of strength, hardness, and durability, Monel K500 Sheets and Plates are perfectly suited for challenging structural and industrial applications.
Standards :ASTM B127 / ASME SB127, AMS 4544
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 4000mm, etc
Thickness : 0.3 mm to 120 mm
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form : Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel K500 | 0.25 max | 1.5 max | 0.5 max | 0.010 max | 27.00 – 33.00 | 0.5 – 2 | 63.00 min |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel K500 | 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 160000 , MPa – 1100 | Psi – 115000 , MPa – 790 | 20 % |
| Stocked Sizes | |
|---|---|
| Size (in inches) | Size (in mm) |
| .125″ | 3.18mm |
| .134″ | 3.40mm |
| .156″ | 3.96mm |
| .187″ | 4.75mm |
| .250″ | 6.35mm |
| .312″ | 7.92mm |
| .375″ | 9.53mm |
| .500″ | 12.7mm |
| .601″ | 15.9mm |
| .750″ | 19.1mm |
| .875″ | 22.2mm |
| 1″ | 25.4mm |
| 1.125″ | 28.6mm |
| 1.250″ | 31.8mm |
| 1.500″ | 38.1mm |
| 1.750″ | 44.5mm |
| 2″ | 50.8mm |
| 2.500″ | 63.5mm |
| 3″ | 76.2mm |
We provide items supplied with both mill test certificates and third-party test certificates, guaranteeing the highest standards of quality and compliance.
Monel K500 Sheets and Plates deliver numerous benefits, such as outstanding corrosion resistance, especially in seawater, alkaline and acidic conditions. Adding titanium and aluminum boosts the alloy’s strength, hardness, and resistance to stress corrosion cracking. Monel K500 also demonstrates superb fatigue and thermal-fatigue strength, which makes it perfect for high-stress uses. It performs excellently at both elevated and reduced temperatures, and its good weldability and formability render it well-suited for intricate shapes. These qualities make Monel K500 perfect for challenging industries like aerospace, marine and chemical processing.
| Thickness | Plate Weight per Unit Area | Density |
|---|---|---|
| 3/16 inches | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/4 inches | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/8 inches | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/2 inches | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 5/8 inches | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/4 inches | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 7/8 inches | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 inches | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/4 inches | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/2 inches | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 3/4 inches | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 inches | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/4 inches | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/2 inches | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 3/4 inches | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3 inches | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
Monel K500 Sheets and Plates are widely applied across industries demanding high strength, resistance to corrosion, and thermal stability. They are typically used in marine components, pump shafts, valves, and fasteners . Within the chemical processing and oil & gas sectors , they function in reactors, piping systems, and heat exchangers . Their outstanding resistance to seawater, acids, and alkalis further makes them well-suited for aerospace parts, industrial machinery, and high-performance engineering applications . Monel K500 Sheets and Plates ensure lasting durability, dimensional stability, and reliability.
Our team stands ready to help you. Reach out to us with any questions or for tailored solutions.
Discover high-quality products tailored to meet your unique needs and preferences.
Get instant quotes that fit your budget perfectly.
Copyright 2024 Al Shakru Sheet and Plates. All rights reserved
